Capping and Coping Bricks

Capping and coping bricks are used to cap the tops of parapet or freestanding walls to offer protection and visual appeal. Cappings sit flush with the vertical face of the wall, while copings project at least 45mm from both sides of the wall and incorporate a drip on the underside to help shed water away from the vertical face of the brickwork below.

CP.1.1

Half Round Coping

CP.1.2

Half Round Capping

CP.2.1

Saddleback Coping

CP.2.2

Saddleback Capping

W.AC.1

Apex Capping

W.CC.1

Low Profile Curved Capping

W.CC.1

Curved Capping

W.CP.11.1

Half Round Coping Stop End

W.CP.11.2

Half Round Coping Return*

W.CP.12.1

Half Round Capping Stop End

W.CP.12.2

Half Round Capping Return*

W.CP.21.1

Saddleback Coping Stop End

W.CP.21.2

Saddleback Coping Return*

W.CP.22.1

Saddleback Capping Stop End

W.CP.22.2

Saddleback Capping Return

* May be supplied in sections.

Red indicates standard face matched to brick type. Where additional faces are required, please liaise with our Design Services Department. Please note that special shaped bricks may be solid, perforated or frogged unless specified otherwise. Manufactured special shapes may vary in colour and texture to the equivalent facing brick product.